VrainLyUser234idn
Answered

Tuklasin ang maliwanag na mga sagot sa iyong mga tanong sa IDNStudy.com. Magtanong at makakuha ng detalyadong sagot mula sa aming komunidad ng mga eksperto na may kaalaman.

How to not tie a tie using tye?

Sagot :

Ttok62600idn

Answer:

The simple oreint knot

1.Drape the tie around your collar with the seam facing inward and the thick end on your left, two or three inches lower than your desired finishing position.

2.Bring the thick end horizontally across the front of the narrow end, and then pass it back horizontally behind the narrow end.

3.Pass the thick end again across the front of the knot from left to right.

4.Now pass the thick end again behind the knot horizontally from right to left.

5.Pass the thick end AGAIN across the front of the knot from left to right. Slip a finger under this third horizontal loop.

6.Bring the tip of the thick end up underneath the loop around your collar and feed it up behind the knot, down over the front of the knot and through that third horizontal loop.

7.Pull the thick end through the horizontal loop and snug it down.

8.Adjust the tie by holding the knot in one hand and pulling gently on the narrow end with the other.

Natutuwa kami na ikaw ay bahagi ng aming komunidad. Magpatuloy sa pagtatanong at pagbibigay ng mga sagot. Sama-sama tayong lumikha ng isang masiglang komunidad ng pagkatuto. Salamat sa pagpili sa IDNStudy.com. Umaasa kami na makita ka ulit para sa mas maraming solusyon.