Unknown5671idn
Answered

Makakuha ng mabilis at malinaw na mga sagot sa IDNStudy.com. Tuklasin ang mga maaasahang impormasyon sa anumang paksa sa pamamagitan ng aming network ng bihasang mga propesyonal.

1. Footing thickness is from ___________.
2. The Plan consists of 8 horizontal and 8 vertical ______ mm dia RSB spaced at.
3. _______ MOC.
4. The stirrups are ______ mm dia.
5. The Minimum RCC beam size should not be less than _______ mm
6. with the addition of a ______ mm slab thickness.
7. The lightest buildings on the strongest soil require footings as narrow as ____
inches.
8. On the first length of rectangle is ______ units in command box
9. The width of first rectangle ______ units in command box
10.The 9x9 columns are to be used for single-storey concrete grade M15 __________
structure (cement: sand: aggregate).

Sagot :

Gamiiidn

Answer:

1. Eight inches is the minimum thickness for a footing. Ten inches is better and twelve inches is highly desirable. The depth of the footing in the ground depends on: the local frost depth.

2. inside diameter of less than 8 bar diameters shall not be less than 4 bar ... most horizontal reinforcement in the slab or footing below.

3. What does MOC mean in finance?

What does MOC mean in finance?Market-on-Close

What does MOC mean in finance?Market-on-CloseA Market-on-Close (MOC) order is a market order that is submitted to execute as close to the closing price as possible. Summary of NYSE markets (NYSE, NYSE MKT, NYSE Arca) rules for entering/canceling/modifying market-on-close (MOC)

4. A stirrup is a light frame or ring that holds the foot of a rider, attached to the saddle by a strap, often called a stirrup leather. Stirrups are usually paired and are used to aid in mounting and as a support while using a riding animal (usually a horse or other equine, such as a mule).

5. 225MM X 225MM

225MM X 225MMMinimum RCC beam size should not be less than 9″x 9″ (225MM X 225MM), with an additional slab thickness of 125 MM. I generally use a minimum of 4 bars, with 2 bars of 12 MM thickness in the bottom of the beam, and 2 bars of 10 MM at the top of the beam.