Cosepjayson5idn
Answered

Sumali sa IDNStudy.com at makakuha ng mga sagot ng eksperto. Sumali sa aming komunidad ng mga bihasa upang makahanap ng mga sagot na kailangan mo sa anumang paksa o problema.

illustrate the different types of welding handle
​

Sagot :

Marvidacyrahidn

Different Types of Welding Handle

(There are four main types of welding)

  • MIG – Gas Metal Arc Welding (GMAW)
  • Gas Tungsten Arc Welding (GTAW)
  • Shielded Metal Arc Welding (SMAW)
  • Flux-cored Arc Welding (FCAW)

                                                                                                         Illustrate these Types of Welding Handle.                                                                                                        

  • MIG – Gas Metal Arc Welding (GMAW)

Also known as high-speed, economical process that is sometimes referred to as metal inert gas.                                                      

  • Gas Tungsten Arc Welding (GTAW)

also known as tungsten inert gas (TIG) welding, is an arc welding process that uses a nonconsumable tungsten electrode to produce the weld.

  • Shielded Metal Arc Welding (SMAW)  

Also known as manual metal arc welding, is a manual arc welding process that uses a consumable and protected electrode.

  • Flux-cored Arc Welding (FCAW)  

Uses heat generated by an electric arc to fuse base metal in the weld joint area. '

Importances of Welding Handle

  • What is the Importance of "Gas Metal Arc Welding" ?

It gives a high rate of metal deposition coupled with good penetration and fusion. It produces a large weld puddle and desirable weld bead appearance with little to no spatter.

  • What is the Importance of "Gas Tungsten Arc Welding" ?

This is the best suited to weld thin sections of stainless steel and light metals, such as aluminum, magnesium, and copper alloys. The process allows the operator greater control over the welding process than other methods, which results in stronger, high-integrity welds

  • What is the Importance of "Shielded Metal Arc Welding" ?

The equipment is simple and affordable. SMAW is not sensitive to wind. There's no requirement for a separate gas shielding.

  • What is the Importance of "Flux-cored Arc Welding" ?

Flux-core welding offers greater penetration, which is good for working with thicker joints. It also allows the welder to travel in all directions and hold the torch in a number of directions.

No problem!! <3

                                     

Salamat sa iyong pakikilahok. Patuloy na magbahagi ng iyong mga ideya at kasagutan. Sama-sama tayong magpapaunlad ng isang komunidad ng karunungan at pagkatuto. Ang IDNStudy.com ang iyong mapagkakatiwalaang mapagkukunan ng mga sagot. Salamat at bumalik ka ulit.