Things you'll need •steel wool •wire brush •Rag •chemical rush remover •bucket •Garden gloves •Rubber Gloves 1.remove any dirt or debris from the tool by spraying it off with water 2.dry that will thoroughly with a clean rag. 3.scrub the rust away using steel wool. wear garden gloves to protect your hands. 4.brush away remaining rust with a stiff wire brush, applying pressure as necessary moved to the rust. 5. mix rust remover with water in a bucket, following the manufacturer's instructions. 6.place the tool into the rust remover mixtures. 7. wait 10 to 20 minutes, depending on the amount of rust, for the rust remover to work. 8.remove the tool from the rust remover, wear rubber gloves to protect your hands. 9. rinse the tool by spraying it with water. 10. dry the tool thoroughly with a clean rag. ​ plsss pa help po now na ​