Write word TRUE if the statement is true and FALSE if the statement is false. Write your answer on the space provided before the statement. _______1. Before taking any resistance or continuity tests in any electronic or electrical circuit or appliance, be sure to unplug the circuit under test _______2. VOM means Voltmeter. _______3. Ohmmeter is used to measure the amount of voltage present in a stage of circuit under test _______4. Hold the metallic part of the test leads when measuring resistance _______5. Zero-adjust the meter pointer by connecting the two test leads while adjusting the ohm-adjustment knob until the meter pointer rests to zero. _______6. Select the proper range or multiplier you think the resistance of the component under test can be measured accurately _______7. Set the function switch of the instrument at rx10 when not in use. _______8. Adjust to 10 ohms the meter pointer by connecting the two test leads while adjusting the ohm-adjustment knob until the meter pointer rests to zero. _______9. Unplug the circuit under test to avoid damage to the instrument. _______10 Set the function switch of the instrument at 250VAC when not in use to safeguard the meter for accidental connection to 220VAC.