Pumbayamihad4idn
Answered

IDNStudy.com, kung saan ang iyong mga tanong ay may mabilis na sagot. Ang aming mga eksperto ay nagbibigay ng mabilis at eksaktong sagot upang tulungan kang maunawaan at malutas ang anumang problema.

based on your understanding, how is the method of plumb bob used in checking the levelness of a form column

pasagot naman ​

Sagot :

Aquinojanelleveniceidn

Answer:

PLUMB BOB

A plumb bob is a pointed weight attached to the end of the string and is used to find a vertical reference line called plumb. Plumb is the vertical equivalent to a spirit level. Plumb bob has been around for thousands of years, dating back to Ancient Egypt. The tool is also used in surveying, allowing the user to find nadir (the local vertical direction pointing towards gravity), and in tools such as steel tape and theodolites.

Plumb Level from Johnson LevelAs an interesting side note, the English word ‘aplomb’ is derived from the French aplomb denoting the concept of standing upright.

How To Use A Plumb Bob

  1. Measure two to three few inches away from the top of the wall and make a mark.
  2. Set a nail in the mark.
  3. Hang the plumb bob on the nail, letting gravity draw a vertical reference line for you.
  4. When the plumb bob is done oscillating, measure the distance from the wall. If it matches the measurement at the top of the wall, your wall is plumb.

Explanation:

Pa Brainliest po, Thank you :)❤

Bean6idn

Answer:

A plumb bob is a pointed weight attached to the end of the string and is used to find a vertical reference line called plumb. Plumb is the vertical equivalent to a spirit level. Plumb bob has been around for thousands of years, dating back to Ancient Egypt. The tool is also used in surveying, allowing the user to find nadir (the local vertical direction pointing towards gravity), and in tools such as steel tape and theodolites.

How to Use A Plumb Bob

  1. Measure two to three few inches away from the top of the wall and make a mark.

2. Set a nail in the mark.

3. Hang the plumb bob on the nail, letting gravity draw

a vertical reference line for you.

4. When the plumb bob is done oscillating, measure the distance from the wall. If it matches the measurement at the top of the wall, your wall is plumb.

Explanation:

This is not my answer credits to

http://www.johnsonlevel.com

Hope this helps sorry if this is not the answer your looking for

#carryonlearning:D

Pinahahalagahan namin ang bawat ambag mo. Patuloy na magbahagi ng impormasyon at karanasan. Sama-sama tayong magtutulungan upang makamit ang ating mga layunin. Ang IDNStudy.com ay laging nandito upang tumulong sa iyo. Bumalik ka palagi para sa mga sagot sa iyong mga katanungan.