Clemsaguilandoidn
Answered

Maligayang pagdating sa IDNStudy.com, ang iyong platform para sa lahat ng iyong katanungan! Makakuha ng hakbang-hakbang na mga gabay para sa lahat ng iyong teknikal na tanong mula sa mga miyembro ng aming komunidad na may kaalaman.

what are ict equipment has a very important use in this time of pandemic?​

Sagot :

Junnied03idn

Answer:

Let's Recall (Review)

Arrange the following steps in copper cable splicing. Write each step in chronological

order from step 1 to 10.

1. Untwist the pairs - don't untwist them beyond what you have exposed, the more untwisted

cable you have the worse the problems you can run into.

2. Strip off about 1-2 inches of the cable sheath.

3. Trim all the wires to the same length, about 1/2" to 3/4" left exposed from the sheath.

4. Align the colored wires according to the diagrams above.

5. Crimp the RJ45 plug with the crimper tool.

6. Insert the wires into the RJ45 plug - make sure each wire is fully inserted to the front of the

RJ45 plug and in the correct order. The sheath of the cable should extend into the RJ45

plug by about 1/2" and will be held in place by the crimp.

7. Cut the cable to length - make sure it is more than long enough for your needs.

8. Verify the wires ended up the right order and that the wires extend to the front of the RJ45

plug and make good contact with the metal contacts in the RJ45 plug.

9. Test the cable using the LAN tester.

10. Repeat the above steps for the second RJ45 plug.

paki answer bro bka alam mo

Ang iyong presensya ay mahalaga sa amin. Magpatuloy sa pagtatanong at pagbibigay ng mga sagot. Sama-sama tayong lumikha ng isang komunidad ng karunungan at pagkatuto. May mga katanungan ka? Ang IDNStudy.com ang may sagot. Salamat sa iyong pagbisita at sa muling pagkikita.