Write TRUE if the statement is correct and FALSE if the statement is wrong.
Fake
1. Always power off and unplug the computer before working on it.
2. Replace only fuses with those proper rating (usually on AVRs).
3. Handle all sensitive components in nonconducting Metallica edge.
4. Check all signal pins and alignment to avoid incorrect connection.
5. Be careful with the sharp edges inside the computer case.
6. Use excessive force when installing computer components to prevent damage
7. Clean your system with wet clothes or any liquid detergents.
8. Always discharge yourself before touching any part of the computer.
9. Use anti-static devices and rubber footwear to disperse static electricity.
10. Do not eat, drink, or smoke when working on your computer.
11. OSH may also protect co-workers, family members, employers, costumers, and many others who
might be affected by the workplace environment.
12. A hazard-based program may not be able to eliminate all risks, but neither does it accept them.
13. The calculation of risk is based on the likelihood or probability of the harm being realized and the
severity of the consequences.
14. You must identify the hazards where you are working and decide how dangerous they are.
15. A hazard is anything that could not hurt you or someone else.
16. Assessing the risk means working out how likely it is that hazard will harm someone and how
serious the harm could be.
17. Ask your supervisor for instructions and training before using the equipment.
18. If you are not sure of the safest way to do something during work, always ask your supervisor.
19. During working hours, you must remain alert to anything that may be dangerous.
20. The assessment should not be recorded and reviewed periodically and whenever there is a
signiſicant change to work practices.​