what is the Academic Text and the Suitability Text No. 1 An electrically safe work condition will be achieved and verified by the following process: (1) Determine all possible sources of electrical supply to the specific equipment. Check applicable up-to-date drawings, diagrams and identification tags; (2) After properly interrupting the load current, open the disconnecting device(s) for each source; (3) Where it is possible, visually verify that all blades of the disconnecting devices are fully open or that draw out type circuit breakers are withdrawn to the fully disconnected position; (4) Apply lockout/tagout devices in accordance with a documented and established policy; (5) Use adequately rated voltage detector to test each phase conductor or circuit part to verify they are de- energized. Before and after each test, determine the voltage detector is operating satisfactorily; and (5) Where the possibility of induced voltages or stored electrical.
